Neravo E2 is a large-capacity hydrogen water bottle designed for clear, repeatable daily operation. Its 1500 ml Tritan body combines an integrated carry handle, a detachable electrolysis base, one 5-minute cycle, and Type-C charging.

• 1500 ml capacity: a large daily format with an integrated handle for easier carrying.
• One defined cycle: press and hold to start the single 5-minute electrolysis cycle.
• Clear status display: view battery status and the 5-minute countdown on the front display.
• Detachable construction: the threaded electrolysis base attaches for operation and removes before drinking.
• Manual-confirmed materials: Tritan bottle body and platinum-titanium electrode.
• Type-C charging: charge with the included cable and a suitable standard wall adaptor.

One clear 5-minute cycle

Press and hold the power control to start. The bottle beeps, the indicator illuminates, and the display presents the battery level followed by the 5-minute countdown. The operating cycle stops automatically when complete.

1500 ml with an integrated carry handle

The transparent aqua-blue Tritan body provides a 1500 ml capacity in a broad sport-bottle format. Its integrated handle is built into the bottle body for everyday carrying between your desk, workout area, and daily routine.

Detachable electrolysis base

The bottle body and electrolysis base connect through a threaded fitting. Before operation, check that the sealing ring lies flat, attach the base securely, and invert the assembled bottle so the base sits at the bottom. Remove the base as directed in the manual before drinking.

Core materials

The bottle body is Tritan, and the electrolysis assembly uses a platinum-titanium electrode.

How to use

1. Start with clean drinking water and keep the fill level below the marked maximum line.
2. Attach the electrolysis base securely and invert the assembled bottle.
3. Press and hold the power control to start the single 5-minute cycle.
4. Wait for the automatic stop, then remove the electrolysis base as directed before drinking.

Before first use

1. Fill the bottle with water below 80°C / 176°F.
2. Allow it to soak for 30 minutes.
3. Run one 5-minute cycle.
4. Empty the bottle before normal use.

Water and care guide

• Suitable examples include purified water, still mineral water, distilled water, and cooled boiled water.
• Use water above 0°C / 32°F and no higher than 80°C / 176°F.
• Do not use carbonated liquids or water containing sediment.
• Do not run the electrolysis base without water or repeatedly process the same water.
• Do not immerse the exterior of the electrolysis base.
• Do not use volatile solvents, detergent, or thinner for cleaning.

Charging

Open the charging-port cover from the notch and connect the included Type-C cable to a suitable standard wall adaptor. Do not use a fast-charging adaptor. During charging, the display flashes the battery icon; the indicator changes from red to blue when charging is complete.

Wall adaptor not included.

Specifications

What's included

• Neravo E2 bottle assembly with detachable electrolysis base
• Type-C charging cable
• User manual

The electrolysis base is shown attached to the bottle. Wall adaptor not included.

Delivery, returns, and warranty

Free standard delivery is available to supported United States addresses. Orders are normally processed within 48 hours, with estimated delivery in 6-14 business days. See the Shipping Policy for details.

Unused products may be returned within 14 days under the conditions in our Returns & Refunds Policy. For drinking devices that have been used, non-quality and non-fault returns are not accepted. Covered faults are eligible for replacement within 30 days, and the product includes a 180-Day Limited Warranty.

Important information

Use clean, safe drinking water and follow the user manual. Product performance may vary with water type, temperature, operating conditions, and use. This product is not intended to diagnose, treat, cure, or prevent any disease.

Free delivery to the United States. Orders are processed within 48 hours and typically arrive in 6–14 business days. Full terms are available in our Shipping Policy.

Unused products may be returned within 14 days. Used drinking equipment is not returnable unless defective. Includes 30-day fault replacement and a 180-day limited warranty. Full terms are available in our Returns & Refunds Policy and Limited Warranty.